Plastic Washing Line Waste Oily PP PE Film Washing Drying Machine

• Customization: Available
• After-sales Service: Video Technical Support, Free Spare Parts, Field I
• Warranty: 1 Year
• Model NO.: RM300/500/1000/1500/2000/2500/3000
• Material Processed: Film and Bags
• Plastic Type: PP PE LDPE HDPE MDPE
• Screw: Single-Screw
• Automation: Automation
• Computerized: Customized
• Certification: ISO9001:2008, CE
• Raw Material: Waste LDPE/LLDPE/HDPE Film, PP Raffia Bags, etc
• Final Moisture: Less Than 5%
• Condition: New
• Machinery Test Report: Provided
• Final Product: Clean LDPE/LLDPE/HDPE/PP/BOPP Flakes
• Final Flake Size: 60-80mm or Customized
• Voltage: 380V, 50Hz, Three Phase(Optinal)
• Power Supply: 300kw/Hr
• Place of Origin: Jiangsu, China
• Water Consumption: 4-10 Ton/H
• Machine Type: PP PE Washing Machine
• Core Components: PLC, Engine, Bearing, Gearbox, Motor, etc
• Transport Package: Stretch Film or Wooden Box
• Specification: 35000mm*5000mm*4200mm
• Trademark: Retech machinery
• Origin: China
• HS Code: 8477800000
• Production Capacity: 100pieces/Year
• Package Size: 5000.00cm * 400.00cm * 420.00cm
• Package Gross Weight: 30000.000kg

Product Description

Plastic Washing Line Waste Oily PP PE Film Washing Drying Machine 

Product Overview

Plastic Film Washing Line
Our Plastic Film Washing Line is used to recycle waste plastic such as plastic bags, PP woven bags, plastic agriculture film,greenhouse films, mulching films,plastic pachage films,PE waste film,PP waste film,PVC waste film, industrial film, printed film and etc.Capacity:300-1500kg/hOur fully automated PE film washing line is the ideal solution to your PP/PE film recycling needs. Using a series of high-tech recyclig machinery,our washing line takes dirty and soiled polypropylene(PP) or Polyethylene(PE) plastic film and turns them into usable,clean,contaminant-free film pesces suitable for pelletizing into PP/PE pellets, or sometimes referred to as granules.

Plastic Washing Machine:

1. The plastic film washing line is widely  is used to crush, wash, dewater, dry and recycle plastic films like agriculture film, bags, PP woven bags and so on.
2. With complete pp pe film washing line, clients can make dry, clean film scraps from wasted material.
3. The whole pp pe film washing line could be "L" or "U" shape according clients' workshop.
4. Low energy consumption, as well save the cost.
5. The last moisture of our produce can be 3%-5%.Normally drying system moisture is about 10%-15%.And at the same time,our drying system can save about 60KW for you compare with the original drying system.

Product flowchart

The LDPE PP PE HDPE Film Washing Recycling Machine Processing:
1.Belt Conveyor 2.Wet Crusher 3.Screw Conveyor 4.Floating Washing Tank 5.Screw Conveyor 6.High Speed Friction Washer 7.Screw Conveyor 8.Dewatering Machine 9. 1^st Drying System  10.Transition Silo 11. 2^nd Drying System  12.Storager Silo 13.Electric Cabinet

Our Machine:
Features:
1. Material: waste PP PE LDPE film, PP woven bags, HDPE bottles and etc
2. High quality with advanced design. Final products are clean and dry.
3. Special machines used in PE/PP film washing line.

Product Specification

Now I show you some parameters of our PP PE washing machine, If you need more details, pls contact with me. 

Model	Capacity	Installed Power	Hot Washing	Water Supply	Area Required(L*W*H)
RM300	300 kg/hr	200 kw	Optional	6-8 m^3/hr	40*4*5 m
RM500	500 kg/hr	350 kw	Optional	8-10 m^3/hr	40*4*5 m
RM1000	1000 kg/hr	600 kw	Optional	15-20 m^3/hr	55*6*6 m

Detailed Photos

1.Crusher
(1)RETECH RT series crusher is applicable to woven bags, jumbo bags,films etc
(2)Using D2 blade which has longer service life than SKD-11 blade.
(3)Our crusher is designed to meet the production requirements of high capacity crushing and one-time crushing of large materials.
(4)Designed according to your raw materials
(5)Design the best cutting angle and the moost suitable cutting rate
(6)Wear resistant design, ensure continuous operation for a long time.
 

2.Floating Washing Tank

(1)Washing tank rollers are designed for high pressure underwater washing, maximum removal of residual impurities can separate materials with different specific gravity, heavy materials with a specific gravity greater than water sink to the bottom of the tank, then discharged through the bottom screw raw materials with a lower specific gravity than water float on the surface and proceed to the next step.
(2)Claw type design discharge roller
(3)Ensure uniform discharge
(4)Effectively control the water content
 

3.High speed friction washer

(1)The friction washer applies the corresponding blade hitting force to different materials at the most suitable rotation speed to achieve the best washing effect
(2)The part with water is used for 304 stainless steel
(3)During the high-speed rotation,separate impurities from raw material
(4)Impurities are discharged through the small mesh in the screen.
 

4.De-watering Machine

(1)The integrated designof the dewatering machine and the fan, no need for a separate fan, which saves energy and enables smooth feeding and discahrging, no blocking.
(2)Adopt high-speed heavy-duty bearing, stainless steel spindles, and blades, dynamically balanced.
(3)Automatic screen cleaning device which is driven by air pressure, labor-saving.
(4)Adopt a container for collecting waster water &residue at the bottom.
 

5.Silo

(1) Easy to collect the final output material, can be customized to your use requirements, with hooks to hang the jumbo bag or other collection containers.
(2)Hydraulic cylinder design make full use of jumbo bag loading space
(3)Each hook can bearing 500kg
(4)Stainless steel inner to protect the final products quality
 

6.Electrical Cabinet

(1)International brand Low voltage components 
(2)Double circuit safety relay
(3)Intelligent and modular PLC controlling system
 

 

Company Profile

Related products

Loading container

 

Sales Service

SEE RETECH MACHINE HOW TO ENSURE THE QUALITY!

1.In order to ensure the accuracy of each part, we are equipped with a variety of professional processing equipment and we have accumulated professional processing methods over the past years.
2.Each component before assembly needs strictly control by inspecting personnel. 
3.Each assembly is in charged by a master who has working experience for more than 20 years
4.After all the equipment are completed, we will connect all the machines and run the full production line to ensure the stable running in customers' factory.

THE AFTER-SALE SERVICE OF RETECH MACHINE!

1.After finish the production, we will debug the production line, take photos, videos and send them to customers via mail or instant tools.
2.After the commissioning, we will package the equipment by standard export package for shipment.
3.According to the customer's request, we can arrange our engineers to customers' factory to do the installation and training.
4.Engineers, sales managers and after-sales service manager will form a after-sales team, online and off line, to follow the customers' project.