China Manufacturer PP PE LDPE PVC Film and Rigid Material Two in One Washing Sorting Machine

• Customization: Available
• After-sales Service: Video Technical Support, Free Spare Parts, Field I
• Warranty: 1 Year
• Model NO.: RM300/500/1000/1500/2000/2500/3000
• Plastic Type: PP PE LDPE HDPE MDPE
• Screw: Single-Screw
• Automation: Automation
• Computerized: Customized
• Certification: ISO9001:2008, CE
• Raw Material: Waste LDPE/LLDPE/HDPE Film, PP Raffia Bags, etc
• Final Moisture: Less Than 5%
• Condition: New
• Service Provided: Video Technical Support, Free Spare Parts, Field I
• Machinery Test Report: Provided
• Final Product: Clean LDPE/LLDPE/HDPE/PP/BOPP Flakes
• Final Flake Size: 60-80mm or Customized
• Voltage: 380V, 50Hz, Three Phase(Optinal)
• Power Supply: 300kw/Hr
• Place of Origin: Jiangsu, China
• Water Consumption: 4-10 Ton/H
• Machine Type: PP PE Washing Machine
• Core Components: PLC, Engine, Bearing, Gearbox, Motor, etc
• Transport Package: Stretch Film or Wooden Box
• Specification: 35000mm*5000mm*4200mm
• Trademark: Retech machinery
• Origin: China
• HS Code: 8477800000
• Production Capacity: 100pieces/Year
• Package Size: 3000.00cm * 400.00cm * 420.00cm
• Package Gross Weight: 30000.000kg

Product Description

China Manufacturer PP PE LDPE PVC Film And Rigid Material Two In One Washing Sorting Machine

Our Plastic Film Washing Line is used to recycle waste plastic such as plastic bags, PP woven bags, plastic agriculture film,greenhouse films, mulching films,plastic pachage films,PE waste film,PP waste film,PVC waste film, industrial film, printed film and etc.Capacity:300-1500kg/h

Product Overview

Plastic Washing Machine:
1. The plastic film washing line is widely  is used to crush, wash, dewater, dry and recycle plastic films like agriculture film, bags, PP woven bags and so on.
2. With complete pp pe film washing line, clients can make dry, clean film scraps from wasted material.
3. The whole pp pe film washing line could be "L" or "U" shape according clients' workshop.
4. Low energy consumption, as well save the cost.
5. The last moisture of our produce can be 3%-5%.Normally drying system moisture is about 10%-15%.And at the same time,our drying system can save about 60KW for you compare with the original drying system.

Detail Description:
Plastic Film Washing line is designed for process and wash waste plasttic thin film with contaminations.
New grinder rotor shape to crush film in higher capacity.
Film squeezer machine for ensure get a lower mosture.
Final film humidity in 3%-5%.
Easy operation with low consumption.

Our Machine

The LDPE PP PE HDPE Film Washing Recycling Machine Processing:
1.Belt Conveyor 2.Wet Crusher 3.Screw Conveyor 4.Floating Washing Tank 5.Screw Conveyor 6.High Speed Friction Washer 7.Screw Conveyor 8.Dewatering Machine 9. 1^st Drying System  10.Transition Silo 11. 2^nd Drying System  12.Storager Silo 13.Electric Cabinet

Cleaning Process of Plastic Film Washing Line:
1.Shredder machine or crusher depend on the shape and size of plastic film.
2.Unique design of new angle blades in crusher to max capacity.
3.High speed friction washer and label remover system to separate film and stickers especially for LLDPE packaging film.
4.Film squeezing machine or centrifuge dryer optionally.
5.Rich experience for different PE film recycling solutions.

Detailed Photos

1.Crusher

(1)RETECH RT series crusher is applicable to woven bags, jumbo bags,films etc
(2)Using D2 blade which has longer service life than SKD-11 blade.
(3)Our crusher is designed to meet the production requirements of high capacity crushing and one-time crushing of large materials.
(4)Designed according to your raw materials
(5)Design the best cutting angle and the moost suitable cutting rate
(6)Wear resistant design, ensure continuous operation for a long time.
 

2.Floating Washing Tank

(1)Washing tank rollers are designed for high pressure underwater washing, maximum removal of residual impurities can separate materials with different specific gravity, heavy materials with a specific gravity greater than water sink to the bottom of the tank, then discharged through the bottom screw raw materials with a lower specific gravity than water float on the surface and proceed to the next step.
(2)Claw type design discharge roller
(3)Ensure uniform discharge
(4)Effectively control the water content
 

3.Friction Washer  

(1)Rotor and blades adopt wear resistant steel;
(2)Rotor with dynamic balance treatment.
(3)Accuracy: ±3-5g;
(4)Active material washing to protect downstream units;
 

4.Dewatering Machine  

(1) Remove the water from the plastic flakes, the finale moisture is less than 5%.
(2) Rotary Speed:1440rpm
(3) The part contact with water is made of SUS304
 

5.Storage Buffer

(1)Direct connect with pelletizing process;
(2)Large Storage capacity;
 

6.Electrical Cabinet

(1)International brand Low voltage components 
(2)Double circuit safety relay
(3)Intelligent and modular PLC controlling system
 

Product Parameters

Type		RT300	RT500	RT1000
Capacity(kg/h)		300	500	1000
Energy consumption(KWH)		95	156	229
Installation power(KWH)		146	241	352
Dimension: L*W*H(m)		Depends on factory layout	Depends on factory layout	Depends on factory layout
Belt conveyor	Belt width(mm)	600	800	1200
	Motor power(KW)	1.5	2.2	3
Metal detector-Optional	Pass width(mm)	800	1000	1200
	Pass height(mm)	400	400	400
Crusher	Grind chamber(mm)	500*700	700*1000	/
	Motor power(KW)	55	75	/
Shredder	Grind chamber(mm)	/	/	/
	Motor power(KW)	/	/	75
Screw conveyor	Screw diameter(mm)	300	400	500
	Motor power(KW)	3	4	5.5
Washing tank	Dimension of tank(mm)	4000×1400	5000×1600	7000×1800
	No. of thumb-wheel(pcs)	4	6	7
	Discharge plate valve(pcs)	2ports*2=4	3ports*2=6	4ports*2=8
Friction washer	Screw diameter(mm)	300	400	500
	Motor power(KW)	11	18.5	30
Squeezing dryer	Screw diameter(mm)	/	320	410
	Motor power(KW)	/	55	75
Storage buffer	Storage capacity(CBM)	3	4	6
	Motor power(KW)	2.2	3	4
Waste water filtration device-Optional	Vibration screen size	800	1000	1200
	Screen mesh	40	40	40
Electrical cabinet	PLC controller	/	/	/
	Button type	/	/	/
Man power(person/shift)		3	3-4	3-4
Delivery time(day)		60-90	60-90	60-90
Warranty(month)		12months	12months	12months
Technical assistance		Egnineer available to service machinery overseas	gnineer available to service machinery overseas	gnineer available to service machinery overseas

Company Profile

Related products

Loading container

 

Sales Service

SEE RETECH MACHINE HOW TO ENSURE THE QUALITY!

1.In order to ensure the accuracy of each part, we are equipped with a variety of professional processing equipment and we have accumulated professional processing methods over the past years.
2.Each component before assembly needs strictly control by inspecting personnel. 
3.Each assembly is in charged by a master who has working experience for more than 20 years
4.After all the equipment are completed, we will connect all the machines and run the full production line to ensure the stable running in customers' factory.

THE AFTER-SALE SERVICE OF RETECH MACHINE!

1.After finish the production, we will debug the production line, take photos, videos and send them to customers via mail or instant tools.
2.After the commissioning, we will package the equipment by standard export package for shipment.
3.According to the customer's request, we can arrange our engineers to customers' factory to do the installation and training.
4.Engineers, sales managers and after-sales service manager will form a after-sales team, online and off line, to follow the customers' project.