Waste HDPE Milk Bottle Flakes Crushing Washing Drying Recycling Production Line
Product Description
Plastics HDPE PP bottle washing recycling machines are complicated on design,nearly there is no standard design,mostly customer has it's own requirements.
As a professional manufacturer for plastics recycling machines. We always provide the customized solutions according to our rich experience and customer's request.
In all, plastics washing machines had following big steps,The following is a case we make for our Brazil customer
1.Crushing part
Crushing part is consist of shredder/crusher. Usually if the plastic is baled in block shape,it needs a baler to open first and then put it into shredder, after shredder it convey to crusher for second time crush into small flakes. Final flakes sized is depend on by the screen hole diameter.
If the size of plastic is not big or it is soft plastic, it is no need to use shredder.
A good crusher machine decide the capacity of the whole line.
2. Washing part
The washing part is to clean the dirty plastics by water. Normally if the plastics is with just mud or sand, cold water is ok to wash. If the plastics with the dirt like heavy oil or glue/stick, It needs hot water to wash. Anyway,it is up to the materials.
Better wash,better products.
3. Drying part
Drying part is another important part of the washing solution. To get a lower moisture,you need to use the right machines based on your material.
We recommend to use squeezing dryer if your material is soft plastic films.
We recommend to use centrifugal dryer if your material is hard plastic flakes.
Detailed Photos
Product Parameters
Capacity(kg/h) |
Power(kw) |
Area(m²) |
Labor |
Water(m³) |
500 |
160 |
500 |
2 |
3 |
1000 |
250 |
800 |
4 |
5 |
2000 |
360 |
1000 |
4 |
6 |
Certifications
Packaging & Shipping
Our Advantages
Features
&High output: max 5000kg/hr HDPE PP bottle recycling line
&Mositure:<1%
&Paticle size:8-14mm(Customzied)