Retech Waste PET/HDPE/LDPE/PP/PE Bottles Films Woven Bags Plastic Recycling Pelletizing/Granulator/Flakes Scrap Crushing Washing/Squeezing Shredder Machine
Product Description
Description of Retech PET HDPE Washing Recycling Machine:
This plastic recycling machine is to crushing washing recycling the waste plastic PET bottles. This PET plastic recycling machine is consist of label remover, sortor, crusher, cold washer, hot washer, dewatering, packing system. It can get the clean PET flakes from PE PP cap, oil, PVC label, then use the PET flakes again, to avoid plastic pollution.
This PET plastic recycling machine can easily wash and recycle waste PET bottles. Waste and dirty PET bottles can be disposal step by step in this PET plastic recycling machine. It is special for recycling PET bottles. We equiped drying system at the end of the washing line so that completely dry flakes can be collected and packed directly after been washed.
The whole PET plastic recycling machine can designed based on how dirty the PET bottles are, and make sure of the quality of the final products.
Coordinating the production line with follow processing work (PET pelletizing machine), and it will make waste and dirty PET bottles to be the PET pellets material, and can to producing new PET bottles.
Purpose and equipment composition:
This production line is specially used for crushing, cleaning, dewatering and drying all kinds of waste plastics. The whole production line is mainly composed of the following equipment: belt conveyor, crusher, friction cleaning machine, film rinsing machine, screw feeding machine, heat cleaning machine, screw feeder, dehydrator, drying system, electrical and so on. The equipment is simple, practical and high yield, which is the most effective production line for recycling waste plastics.
Our pelletizing Machine Advantages:
1) Simple design, user-friendly operation.
2) Siemens brand motors, ABB inverters.
3) Siemens PLC, Gefren pressure sensors, Omron Temperature controllers, LS air switch.
4) Lower investment cost for a high quality and durable machine.
5) Low energy consumption, High output.
6)Retech produces more than 10 sets of series pelletizing machines per month. Usual delivery time: 50 days, and we have sample machines for customer visiting checking.
7) Engineers are available to do commissioning work abroad.
Application for PET washing line:
This recycling line is composed of garbage separation (automatic & manual), bottle & flake crushing, cold & hot washing & cleaning, flake dewatering & drying, dust & label removal, packing, etc.
PP PE film plastic pelletizing production line is mainly used to make pellets from waste plastics, like PP, PE films, agricultural films, LDPE stretch films, LLDPE films, PP woven bags, shopping bags, and other soft PP,PE plastics.
Processing capacity is from 100kg/h to 1500kg/h.
Condition of final PET flake for PET washing line:
Moisture: Not more than 1.0%
PVC Content: Not more than 200ppm
Metal Content: Not more than 20ppm
Label, ring and caps Content (i. e. PE, PP): Not more than 240ppm
Total amount: Not more than 560ppm
Main Fetures
Features for PET washing Recycling line:
1. The material is mainly PET bottles, including water bottles, cola bottles…
2. The main parts of the PET washing recycling plant is label separating, crushing, cold and hot washing, caps separating, dehydrator and drying parts.
3. The capacity of the PET washing recycling plant is from 300kg/h to 3000kg/h.
4. There crusher is to crush the rigid material into small pieces with size from 1mm to 15mm depending on customers' need.
5. Mechanical label separator and zigzag label separator can ensure to remove the labels thoroughly.
6. Sinking swimming tank can not only remove dirties of the flakes, but also can remove the caps out.
7. High speed friction washer and hot sinking swimming tank can remove the strong dirties, like the grease, oil, glue.
8. By dehydrator and drying system, the final products plastic flakes moisture level can be lower than 1%.
9. The final products PET flakes, the PVC level is lower than 150PPM, the impurities level is lower than 100PPM.
10. The PET flakes can be taken directly to make the fibers, straps, and also can be granulated to be granules.
Detailed Photos
Brief Machine Technical datas for reference:
Model |
Extruder |
Screw diam.(mm) |
L/D Ratio |
Power(kw) |
Capacity (PE) (kg/h) |
Capacity (PP) (kg/h) |
| PL-100 |
SJ100/33 |
100 |
33:1 |
210 |
280-350 |
250-300 |
| PL-130 |
SJ130/33 |
130 |
33:1 |
300 |
480-550 |
400-480 |
| PL-160 |
SJ160/33 |
160 |
33:1 |
370 |
650-750 |
550-650 |
| PL-180 |
SJ180/33 |
180 |
33:1 |
460 |
800-1000 |
750-850 |
Feeding type of pelletizing machine for plastic recycling
1. Hopper Feeding Recycling Pelletizer
Side feeding is a stable, continuous feeding method. Overloads and underloads are avoided, thus guaranteeing maximum efficiency.
2. Side Feeding Recycling Pelletizer
Hopper feeding is a flexible feeding method, without preheating, both soft and hard plastics can be processed
Cutting types for plastic recycling pelletizing systems:
- Hot Die Face Peletizing System
- Hot Die Water-ring Pelletizing / Underwater Pelletizing System (UWP)
- Strand Peletizing System
- Automatic Strand Peletizing System
Electric Part & Safe Device & Automation:
- When accident system automatic stop & alarm
- Emergency switch when accident
- Famous Mitsubishi brand PLC, Touch-screen Control Panel & inverter
- Famous Omron brand sensor & other electric parts adopted, heavy duty running
- Food Grade 304 stainless steel rinsing pump, reliable & sanitary
Machine Base & Machine Construction:
- 304 stainless steel frame
- Tempering Glass window, Clear & no odor
- Excellent start wheel design, easy change over parts
- Machine Base with anti-rust process, ensure the forever antirus
- All seal where liquid may Leakage & base neck come with rubber, water proof
- Manual lubrication system
Product Parameters
| Capacity |
1000kg/h |
2000 kg/h |
3000 kg/h |
| Workshop(M*M*M) |
42 (L)×10(W)×6(H) |
55(L)×15(W)×6(H) |
70(L)×18(W)×6(H) |
| Ancillary staff |
4-6Persons |
6-8 Persons |
8-12 Persons |
| Installation power |
300KW |
400KW |
450KW |
| Water Consumption: |
6-8Ton/h |
8-10Ton/h |
10-15 Ton/h |
| Final product |
Moisture: max 1%
Bulk density: 0.3G/CM3
Particle size: 14-18mm
Metal content: max.20ppm
Floatable contamination: less than 200ppm
Total impurity: 320ppm |
Certifications
our advantages:
1. Recycled material: Total impurity content ≤320PPM, Moisture content≤2%.
2. Production Capacity: 300-3500Kg/h
3. Plan design according to Customers' requirements.
4. Simple design, user-friendly operation.
5. Lower investment cost for a high quality and durable machine.
6. Low energy consumption, High output capacity.
7. Usual delivery time: 60 days.
8. Engineers are available to do commissioning work abroad.
Service
1. We not only provide machines but also offer technical guide and market evaluate.
2. We will provide all the machines for the complete production according to customer's requirements.
3. We will provide complete service for factory layout and other information to help customer to build the factory.
4. We will provide good service for machine installation and training, until the customers can run the machines and make stably production.
5. Except one year quality guarantee, we will provide after-sell service for all the life.
6. For long-term cooperation, we always provide good quality, good price and good service to customer.
Company Profile
Exhibitions
Audited Supplier 
){kind=link}