| Customization: | Available |
|---|---|
| After-sales Service: | Send After-Sale Engineer |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Our LDPE LLDPE HDPE Film Plastic Pelletizing Machine, it is a three in one recycling machine designed for low density plastic articles. It could provide the excellent re-pelletizing and recycling solution for film, raffia, filament, woven bag and nonwoven fabric and other consumed / post soft or rigid plastic.
Final productions produced by ECS plastic pelletizing machine system are in the form of pellets/ granules, can directly put into the production line for film blowing, pipe extrusion and plastics injection, etc.
Description of our LDPE LLDPE HDPE Film Plastic Pelletizing Machine:
1. Belt conveyor & Metal detector
- The plastic material feed through belt conveyor get into the compactor.
- Metal detector can be installed on conveyor, to protect the compactor and extruder machine.
2.Cut Compactor unit
- The rotatory blades of compactor will cut up incoming scraps.
- Frictional heating which caused by high speed rotatory blades and stationary blades will heat and let scraps shrinking just below their agglomerating point.
- Optimal designed guide structure compacts the material and directs it into extruder screw.
3. Extruder unit
- A specialized single screw extruder applied to gently melt the pre-compacted material.
- The plastic scraps will be well melted, plasticized in the extruder.
- With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with some water content.
4. Hydraulic filtration unit
- A screen changer can be installed before die head to remove some metal, wood, dust, paper such impurities to get high quality output plastic melt.
5. Plastic pelletizing system
- Die-face water ring pelletizing system set as the standard granulating method to get uniform size plastic pellets.
- The pellets would be cooled by water and dried by centrifugal dryer and finally conveyed into storage silo.
6. Dewatering machine
a) Centrifugal removing moisture of plastic granules/pellets less than 1%.
7. Electric control components
Top brand components. PLC controller and HMI screen.
One button start & stop. Multi-language operating system.
| Models | Screw diameter | L/D | PP | PE |
| RS85 | 85mm | 33:1 | 160kg/h | 200kg/h |
| RS100 | 100mm | 33:1 | 250kg/h | 300kg/h |
| RS130 | 130mm | 30:1 | 380kg/h | 500kg/h |
| RS160 | 160mm | 28:1 | 650kg/h | 800kg/h |
){kind=link}